Gold APP Instruments Corporation China had coordinated with ISU (Iowa State University) to established one gas adsorption demo lab on campus of ISU. Professor Mufit Akinc from the Materials Science & Engineering said they had already well installed and calibrated all demo analyzers (gas pycnometer density analyzer G-DenPyc 2900 & BET surface area and porosimetry analyzer V-Sorb 2800P) with helps from GAPP engineer, were ready to receive visitors to go this lab to view analyzers onsite, to test their samples and value instruments quality.
Click to view details
BET Surface Area|Porosity Analyzer|Gas Pycnometer Helium True Density Equipment|High Pressure Volumetric Analyzer| Langmuir/BET/Gibbs/BJH/MP/SF/DR/DA/HK/T-Plot Analyzer
F-Sorb X400CE series BET surface area analyzers
2016年3月22日星期二
2013年8月8日星期四
2013年7月15日星期一
F-Sorb 3400CE surface area ana pore size analyser
F-Sorb 3400CE surface area
and pore size analyzer introduction
F-Sorb X400CE series surface area and porosity analyzers
are new generation instruments which were researched and developed by Gold APP
Instruments and China weapons institute. Gold APP Instruments is one
of analytical equipments manufacturers among world suppliers,
our fully-auto and highly intelligent analyzers can match international
standards and trends. Innumerable independently patented techs make Gold APP
instruments enjoys great popularity at home and abroad. A high level of
precision and resolution, complicity of operation, speed, compact size, and
their stability guarantee our analyzers equally appropriate to industry quality
control, institutes, universities and laboratories. The weapons system’s high
demands and imported parts with original packaging had greatly improved
instruments’ reliability and life.
F-Sorb 3400CE adopts speed and
efficient flow gas adsorption principle, not only an expert for
contrast reference materials method and BET method, but also a specialist
for BJH total pore volume and pore size distribution analysis. Excellent cost
performance can assure your investment gains with ease.
F-Sorb 3400CE surface area
and pore size analyzer parameters
Measuring Method: BJH total pore volume, pore area and porosity analysis, contrast
reference materials method, single and multi point BET method, Langmuir
surface area, carbon black surface area (STSA), adsorption constant C.
Measuring Ranges: 0.01 m2/g to no known upper limit (specific
surface area)
2-200nm (pore size)
Accuracy: repeatability errors ≤2%
Traffic Adjust: Gold APP patented F-Sorb micro stepping motor traffic
can realize traffic auto-adjust for every P/Po point in BET
analysis; traffic value auto-collected by software and real-time displayed in
interface
Quantitative Dosing: patented F-Sorb quantitative pipeTM desorbs
automatically, realized auto dosing for sample desorption isotherm, manual
pipeline switch is not required
Manifolds’ Sealing: high vacuum system with stainless steel manifolds, sound
sealing performance can eliminate errors caused by gas molecules permeation
Sample Types: powders, particle, fiber, flakes and other species
Sample Ports: 4 samples simultaneously
Analysis Gases: high purity (99.99%) He as carrier; N2
(99.99%) as adsorbate, Ar, Kr etc. are optional
Time: less than 5 minutes for every P/Po point’s adsorption and
desorption; analysis data will present automated by Gold APP softwareTM
Pressure: atmospheric pressure, no need vacuum, save experiment
time
Data Acquisition: high precision and integration chip, minimal errors,
strong anti-interference ability
Data Reduction: Windows®-base independently developed Gold APP softwareTM,
perfect versatility, ease of use and multi-model data reduction reports (pdf,
word, excel, txt)
Operation System: multifunctional, fully automated, highly intelligent
operation system
Fully
automated and intelligent analyzer; farewell to complex manual operation; minimal
user intervention; promote efficiency; F-Sorb 3400CE had improved a lot besides
F-Sorb 2400CE outstanding features.
A. Structure Design
1.
Stainless manifolds system is much better than plastic manifolds, obviously
enhances sealing performance, eliminates errors caused by gas molecules
permeation, no ageing for manifolds, increase reliability and prolong life,
more appropriate for humid environment.
2.
Modularity structure satisfies customer required configuration and instrument
maintenance.
B. Control System
1.
Integrated multifunctional control system; motor screw rod lifting system
ensures Dewar stable running.
2.
Innovated balanced bridge circuit greatly improves signal voltage sensitivity,
as well as achieves auto balance of signal zero drift.
3.
Fully-auto operation, minimal operator involvement and work efficiency
improved.
C. Data Acquisition and Reduction
1.
High precision data acquisition and signal amplification, high integrated A/D
transformation system, strong anti-interference ability and high real time, can
reduce environmental influence on analysis procedures.
2.
Utilize super sensitive thermal conductivity detection and balance system can
increase detectable signal range; zero drift auto calibration system enhances
stability and accuracy.
3.
Independently innovated Windows® compatible software, versatile
applications, flexible customer-tailor interface, ease of use; self developed
data reduction module can efficiently eliminate system errors and improve
precision.
4.
Customer made data reports and diversified calculation models are convenient
for data analyzing; powerful data archiving and searching capacity helps a lot
for data management.
D. Analysis Optimize
1.
Multi analysis methods, no need to convert operations frequently, all set in
dedicated software.
2. Specific
surface area and porosimetry analysis can switch freely, simplify operation
steps and improve measurement efficiency.
3.
Pioneered sample desorption isotherm integral calibration function for bigger
P/Po, which advances accuracy; innovated gas amount auto-adjust
system brings exactly control for high/low partial pressure in porosity
measurement.
F-Sorb 3400CE surface area
and pore size analyzer application
1.
Super micro powder, nanomaterials, particle and fiber shaped specific surface
area analysis.
2.
Product quality control for powder species related corporations.
3.
Research institutes, universities for BET and BJH theory teaching.
4.
Full cells, catalysts, additives, adsorbent, ceramics, magnetic materials,
energy storage materials etc.
5.
Other researches concern surface area performance.
Contact info:
Email: sales@jinaipu.com
Tel.:
0086-10-82133318 Ext.810
Fax:
0086-10-82118197
Mobile:
0086-18210009838
IMs:
Skype:
Gold-APP-Instruments
F-Sorb 2400CE BET surface area analyzer for laboratory use
F-Sorb 2400CE BET surface area analyzer introduction
F-Sorb X400CE series
surface area and porosity analyzers are new generation instruments which were
researched and developed by Gold APP Corporation and China weapons institute.
Innumerable independently patented techs make Gold APP instruments enjoy great
popularity at home and abroad. A high level of precision and resolution,
complicity of operation, speed, compact size, and their stability guarantee our
analyzers equally appropriate to industry quality control, institutes,
universities and laboratories. The weapons system’s high demands and imported
parts with original packaging had greatly improved instruments’ reliability and
life. The high cost performance of F-Sorb X400CE series analyzers easily ensure
your investment profits and flexible equipped peripheral can satisfy different
users’ demands.
F-Sorb 2400CE adopts
speed and efficient continuous flow nitrogen adsorption principle, is an expert
for contrast reference materials method and BET method analysis. BET method is
universally recognized and the most commonly used way for nitrogen adsorption
surface area analysis. No need of reference materials (RM) and utilizes sorption
with incorporates multilayer coverage to calculate surface area. Experimental
data do not vary with different sample types, high accuracy and quite
scientific make F-Sorb 2400CE be a desirable for quality control in production
field, research institutes and universities.
F-Sorb 2400CE BET surface area analyzer parameters
Measuring Method: reference
materials method, single and multi point BET method, Langmuir surface area, adsorption
and desorption isotherm, average particle size estimate, carbon black external
surface (STSA), adsorption constant C analysis etc.
Measuring Ranges:
0.01 m2/g to no known upper limit (surface area)
Accuracy:
repeatability errors ≤1%
Traffic Adjust:
Gold APP patented F-Sorb micro stepping motor traffic can realize traffic
auto-adjust for every P/Po point in BET analysis; traffic value
auto-collected by software and real-time displayed in interface
Quantitative Dosing:
patented F-Sorb quantitative pipe TM desorbs automatically, realized
auto dosing for sample desorption isotherm, manual pipeline switch is not
required
Manifolds Sealing: high
vacuum system with stainless steel manifolds, sound sealing performance can
eliminate errors caused by gas molecules permeation
Sample Types:
powders, particle, fiber, flakes and other species
Sample Ports: 4
samples simultaneously
Analysis Gases:
high purity (99.99%) Helium as carrier; Nitrogen (99.99%) as adsorbate; Ar,
Kr etc. are optional
Time: less than 5 minutes for
every P/Po point’s adsorption and desorption; analysis data will
present automated by Gold APP softwareTM
Pressure: atmospheric
pressure, no need vacuum, save experiment time
Data Acquisition:
high precision and integration chip, minimal errors, strong anti-interference
ability
Data Reduction:
Windows®-base independently developed Gold APP softwareTM, perfect
versatility, ease of use and multi-model data reduction reports
Operation System:
multifunctional, fully automated, highly intelligent operation system
F-Sorb 2400CE BET surface area analyzer features:
Fully
automated, farewell to complex manual operation; minimal user intervention; promote efficiency.
A. Structure Design
1. Stainless manifolds
system is much better than plastic manifolds, obviously enhances sealing
performance, eliminates errors caused by gas molecules permeation, no ageing
for manifolds, increase reliability and prolong life, more appropriate for
humid environment.
B. Control System
1. Integrated
multifunctional control system; motor screw rod lifting system ensures Dewar stability.
2. Innovated balanced
bridge circuit greatly improves signal voltage sensitivity, as well as achieves
auto balance of signal zero drift.
3. Fully-auto operation,
minimal operator involvement and work efficiency improved.
C. Data Acquisition and Reduction
1. High precision data
acquisition and signal amplification, high integrated A/D transformation
system, strong anti-interference ability and high real time, can reduce
environmental influence on analysis procedures.
2. Utilize super
sensitive thermal conductivity detection and balance system can increase detectable
signal range; zero drift auto calibration system enhances stability and
accuracy.
3. Independently
innovated Windows® compatible software, versatile applications,
flexible customer-tailor interface, ease of use; self developed data reduction
module can efficiently eliminate system errors and improve precision.
4. Customer made data
reports and diversified data calculation models are convenient for data
analyzing; powerful data archiving and searching capacity helps a lot for data
management.
D. Analysis Optimize
1. Multi analysis
methods, no need to convert operations frequently, all set in dedicated
software.
2. Contrast reference materials
method and BET method can switch freely, simplify operation steps and improve
measurement efficiency.
3. Pioneered gas amount
auto-adjust system brings extremely accurate, stable and no user intervention
analysis.
4. Can be upgraded to
F-Sorb 3400CE.
1. Super micro powder,
nanomaterials, particle and fiber shaped surface area analysis.
2. Product quality
control for powder species related corporations.
3. Research institutes,
universities for BET theory teaching.
4. Full cells, catalysts,
additives, adsorbent, ceramics, magnetic materials, energy storage materials
etc.
5. Other researches
concern surface area performance.
Contact info:
Email: sales@jinaipu.com
Tel.:
0086-10-82133318 Ext.810
Fax:
0086-10-82118197
Mobile:
0086-18210009838
IMs:
Skype:
Gold-APP-Instruments
F-Sorb 1400CE specific surface area analyzer
F-Sorb 1400CE surface area
analyzer introduction
F-Sorb
X400CE series surface area and porosimetry analysers are new generation
instruments which were researched and developed by Gold APP Instruments and
China weapons institute. Gold APP Instruments is the ONLY one domestic manufacturer
can produce no user intervention, fully-auto and highly intelligent analyzers
which can match international standards and trends. Innumerable independently
patented techs make Gold APP instruments enjoy great popularity at home and
abroad. A high level of precision and resolution, complicity of operation, speed,
compact size, and their stability guarantee our analyzers equally appropriate
to industry quality control, institutes, universities and laboratories. The weapons
system’s high demands and imported parts with original packaging had greatly
improved instruments’ reliability and life. The high cost performance of F-Sorb
X400CE series analyzers easily ensure your investment profits and flexible equipped
peripheral can satisfy different users’ demands.
F-Sorb
1400CE adopts speed and efficient continuous flow nitrogen adsorption
principle, is a bosom friend for contrast reference materials method analysis
which calculates surface area by comparing with reference materials’ (RM)
adsorption/desorption isotherm. No need of gas adsorption/desorption amount
dosing, suitable for those samples have similar adsorption performance with RM.
F-Sorb 1400CE mainly be used for quality control of production field, quick
speed is its primary and pleased advantage which makes it easily stay ahead of
your competition.
F-Sorb 1400CE surface area
analyzer parameters
Measuring Method: contrast reference method by dynamic nitrogen adsorption
Measuring Ranges: 0.01 m2/g to no known upper limit (surface area)
Accuracy: repeatability deviations ≤1%
Sample Types: powders, particle, fiber, flakes and other species have
similar adsorption performance with reference materials (RM)
Sample Ports: 4 samples simultaneously
Adsorbate: mixed He+N2 (4:1) with high purity
Time: about 5 minutes for every P/Po point’s adsorption
and desorption; analysis data will present automated by Gold APP softwareTM
Pressure: atmospheric pressure, no need vacuum, save experiment
time
Data Acquisition: high precision and integration chip, minimal deviations,
strong anti-interference ability
Data Reduction: Windows®-base independent developed Gold APP softwareTM,
perfect versatility, ease of use and multi-model data reduction reports.
Operation System: multifunctional, fully automated, highly intelligent
operation system
F-Sorb 1400CE surface area
analyzer features:
Domestic
first fully automated and intelligent analyzer; farewell to complex manual
operation; minimal operator involvement; promote efficiency.
A. Structure Design
1. Modern
design with compact size can save your valuable bench space.
2. Stainless
steel manifold system obviously improves sealing performance, eliminates deviations
caused by gas molecules permeation, no ageing for manifolds, increase
reliability and prolong life.
B. Control System
1. Integrated
multifunctional control system; motor screw rod lifting system ensures Dewar stability.
2. Innovated
balanced bridge circuit greatly improves signal voltage sensitivity, as well as
realizes auto balance of signal zero drift.
3. Fully-auto
operation, minimal user involvement and work efficiency improved.
C. Data Acquisition and Reduction
1. High
precision data acquisition and signal amplification, high integration A/D
transformation system, strong anti-interference ability and high real time, can
reduce environmental influence on analysis procedures.
2. Independently
innovated Windows compatible software, versatile applications,
flexible customer-tailor interface, ease of use; Self developed data reduction
module can efficiently eliminate system deviations and improve accuracy.
3.
Customer made data reports, diversified forms module, convenient for data
analyzing; powerful data archiving and searching capacity helps a lot for data management.
4. Can
be upgraded to F-Sorb 2400CE.
F-Sorb 1400CE surface area
analyzer applications
1.
Super micro powder, nanomaterials, particle and fiber shaped specific surface
area analysis.
2. Product
quality control for powder species related corporations.
3. Research
institutes, universities for BET theory teaching.
4.
Full cells, catalysts, additives, adsorbent, ceramics, magnetic materials,
energy storage materials etc.
5.
Other researches concern surface area performance.
Contact info:
Email: sales@jinaipu.com
Tel.:
0086-10-82133318 Ext.810
Fax:
0086-10-82118197
Mobile:
0086-18210009838
IMs:
Skype:
Gold-APP-Instruments
订阅:
博文 (Atom)